Improved Stability of 4H Sic-MOS Devices after Phosphorous Passivation with Etching Process
DOI:
https://doi.org/10.14331/ijfps.2014.330064Keywords:
Silicon carbide, interface trap density, XPS, phosphosilicate glassAbstract
Phosphorous passivation of the interface (4H-SiC/SiO2) improves interface trap density (Dit) from 1013 eV-1cm-2 to 2×1012eV-1cm-2 at 0.2eV below the conduction band edge of 4H-SiC. Due to the formation of phosphosilicate glass (PSG) layer during P passivation, metal-oxide-semiconductor capacitors (MOS-Cs) are highly unstable. Under bias-temperature stress (BTS) there is very large shift in the flatband voltage, VFB, (independent of the bias polarity) of MOS-Cs. In this paper we proposed a new method to improve the stability of these devices. The PSG layer formed after passivation is etched-off in buffered oxide etch (BOE) and then capped with deposited oxide. Devices fabricated with this process showed Dit of 4x1012eV-1cm-2, and are stable after BTS test performed at 150oC, +1.5MV/cm. This value of Dit is as good as the-state-of-the-art NO/N2O passivated MOS-C. Also, XPS indicated the presence of P at the interface after etching which explains “NO/N2O –like” Dit for etched PSG MOS-Cs.
Downloads
References
Chung, G., Tin, C., Williams, J., McDonald, K., Chanana, R., Weller, R. A., Das, M. (2001). Improved inversion channel mobility for 4H-SiC MOSFETs following high temperature anneals in nitric oxide. Electron Device Letters, IEEE, 22(4), 176-178.
Cooper Jr, J. (1997). Advances in SiC MOS technology. physica status solidi (a), 162(1), 305-320.
CREE.(2014).C2M1000170D http://www.cree.com/Power/Products/MOSFETs/TO247/C2M1000170D.
Gupta, S. K., Singh, J., & Akhtar, J. ( 2012). Physics and Technology of Silicon Carbide Devices
Kern, W. (1990). The evolution of silicon wafer cleaning technology. Journal of the Electrochemical Society, 137(6), 1887-1892.
Kern, W. (1991). Thin film processes II (Vol. 2): Academic press.
Kern, W. (1993). Handbook of semiconductor wafer cleaning technology. New Jersey: Noyes Publication, 111-196.
Kurimoto, H., Shibata, K., Kimura, C., Aoki, H., & Sugino, T. (2006). Thermal oxidation temperature dependence of 4H-SiC MOS interface. Applied Surface Science, 253(5), 2416-2420.
Lelis, A. J., Habersat, D. B., Green, R., & Goldsman, N. (2009). Temperature-Dependence of SiC MOSFET Threshold-Voltage Instability. Paper presented at the Materials Science Forum.
Liu, G., Ahyi, A. C., Xu, Y., Isaacs-Smith, T., Sharma, Y. K., Williams, J. R., Dhar, S. (2013). Enhanced Inversion Mobility on 4H-SiC Using Phosphorus and Nitrogen Interface Passivation. Electron Device Letters, IEEE, 34(2), 181-183.
Okamoto, D., Yano, H., Hatayama, T., & Fuyuki, T. (2010). Removal of near-interface traps at SiO 2/4H–SiC (0001) interfaces by phosphorus incorporation. Applied Physics Letters, 96(20), 203508-203508-203503.
Sharma, Y., Ahyi, A., Isaacs-Smith, T., Modic, A., Park, M., Xu, Y., .Williams, J. (2013). High-mobility stable 4H-SiC MOSFETs using a thin PSG interfacial passivation layer. IEEE Electron Device Lett, 34(2), 175-177.
Sharma, Y., Ahyi, A., Issacs-Smith, T., Shen, X., Pantelides, S., Zhu, X., Williams, J. (2012). Phosphorous passivation of the SiO< sub> 2/4H–SiC interface. Solid-State Electronics, 68, 103-107.
Vossen, J. L., & Kern, W. (1991). Thin film process II. Aca-demic Press, New York, 181-186.
Xu, Y., Zhu, X., Lee, H., Xu, C., Shubeita, S., Ahyi, A., . . . Ceesay, S. (2014). Atomic state and characterization of nitrogen at the SiC/SiO2 interface. Journal of Applied Physics, 115(3), 033502.
Zhang, X. (2013). Reliability and Irradiation Effects of 4H-SiC MOS Devices. Vanderbilt University
Published
Issue
Section
License
Copyright (c) 2014 International Journal of Fundamental Physical Sciences

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
WorldCat
Scilit
ORCID